| Ferrule pre-assembly machine | Presses the ferrule onto the tube end before the fitting is assembled. Replaces hand seating, so the seating depth is set by the machine rather than by operator feel. |
|---|
| Tube end forming machine | Reshapes the tube end by radial extrusion under hydraulic pressure: flaring, expanding, necking and beading on one unit with interchangeable clamping dies and ejector tools. |
|---|
| Memory pipe bending machine | Stores multi-angle parameter sets and repeats them, with a deformation-prevention structure and foot control. Aimed at small and mid-size tube workshops that switch between runs. |
|---|
| Steel pipe deburring machine | Removes burrs, flash, sharp edges, weld slag and oxide from the inner wall, outer wall and end face after cutting, welding or stamping, so the surface is consistent before assembly. |
|---|
| Tube cutting machine | Cold saw cutting of tube to length with a burr-free cut face, the first step of the tube preparation chain. |
|---|
| PTFE tape winding machine | Winds thread sealing tape to a consistent tension and overlap, replacing manual winding in accessory workshops. |
|---|
| Steel tube spinning flaring machine | Spinning forming of tube ends where the wall is thinned and flared by roller action rather than by press. |
|---|
| Metal sawing equipment | Band saw cutting for bar and tube where a portable or floor unit is needed before machining. |
|---|
| Hydraulic ferrule | Cutting-ring ferrules in carbon steel, 304 and 316 stainless, matched to tube material and wall thickness. |
|---|
| Hydraulic fitting | Straight, angle and tee bodies including F37 valve block configurations and EO-2 functional nuts for pre-assembled lines. |
|---|
| SAE 37° flare flange | Flare-flange connections that mate with 37° flared tube ends produced on the KC-WF42 forming machine. |
|---|
| Hydraulic sleeve | Sleeves in 316 and 304 stainless plus carbon steel, sized to the ferrule and the tube outside diameter. |
|---|
| Functional nut (EO-2 style) | DOZ, FORM, HO2 and FM functional nuts for pre-assembled hydraulic lines, with the dimensional tables from the current data sheets. |
|---|
| Ball plug | KC, KCQD, KCS and KCV ball plug series covering metric and inch bore sizes. |
|---|
| Metric bolt and 5T fittings | 700M metric bolt program and the 5T fitting family, with thread and dimensional data from the parameter sheets. |
|---|
| Banjo body (articulated fitting) | Articulated banjo bodies for hose and tube connections where the fitting must rotate before final tightening. |
|---|